Archive

Danchip have passed the 1-stage audit without any issues.

The certification audit will take place 14-16 June 2010.

The ISO 9001 – certification will cover “Access and use of equipment in clean room facilities for micro-and nano-fabrication and in-sourcing of customer processes."

Any questions or concerns regarding the certification can be directed to Quality Manager, Nina Christensen

DTU Danchip is right now installing two new ICP (Inductively Coupled Plasma) etching systems: An STS Pegasus Silicon Etcher for deep anisotropic silicon etching and an STS ICP-SR for dry etching of metals (mainly Al and Cr). The installation and acceptance tests are expected to be completed by the end of March. A third ICP dry etching system for etching III-V materials is expected delivered in week 8 and will be installed shortly after.

In week 8, a system for 2-photon-polymerization from the company Nanoscribe is expected for delivery. This system will be installed in the yellow room in phase 3 of the cleanroom.

Finally, in week 8-9 we expect to complete the pre-acceptance test on the new multi-source PVD system (Cryofox 700 Flex from POLYTEKNIK). This system contains 2x e-beam sources (a single pocket source and a two pocket source) for co-evaporation (metal alloys) and 4x sputtering magnetrons (2 RF / 2 DC) for sputter deposition of metals and dielectrica a.o. piezo-materials.

At DTU Danchip a professional service towards our customers is an essential element in our daily work. 

As a new initiative we have therefore set up an email for you to use whenever you have any good ideas, input, comments or suggestions for improvement at DTU Danchip. Mails sent to us will be evaluated on a weekly basis and you can expect an answer within 2 weeks.

We appreciate your comments and we are looking forward to hearing from you.

Danchip has signed a contract with Norske Veritas to certify Danchip Services to DS / EN ISO 9001:2008 (http://www.dnv.com/services/certification/)

Three new pieces of ICP Etching equipment are to be installed inside DTU Danchip clean room by mid January, 2010.

DTU Danchip, National Center of Micro- and Nanofabrication, attracts another international company to its state-of-the-art facilities.

DTU Danchip dedicate LPCVD Nitride Furnace for stoichiometric nitride deposition

Allows both staff and cleanroom users to share micro- and nanotechnology process knowledge.

Jörg Hübner has been appointed Interim Director for DTU Danchip, Denmark’s largest center for fabrication and development of top down micro- and nanotechnology.

As of February 1st 2009, Vick Mangru is appointed Sales, Marketing and Business Development Manager.